Receipt Printer

Options depend on whether Share Printer, Use OPOS, or Use 3rd party interface checkboxes are selected.

• When Use OPOS is selected, the only Port option is USB.

• When Use OPOS is not selected, the Port options are: None, com1, com2, com6, and lpt1.

• If Use 3rd party interface is checked, 32 port options appear in the drop-down menu. Use the com20 port for Smart Receipt™.

The selections for this drop-down menu change depending whether the Share Printer checkbox or the Use OPOS checkbox is selected. When Share Printer is selected, the Printer Type options are:

• default

• Epson TM-P60/P-20

• Zebra Cameo

• Zebra MZ-220

• Zebra QL-220

• Zebra RW 220

When Use OPOS is selected, the Printer Type options are:

• Epson TM-L90

• Epson TM-T70

• Epson TM-T88IV

• Epson TM-T88V

• Epson TM-T88VI

• HP A794

• IBM 4610

The setting entered controls where receipt printing begins on the left margin of the POS terminal receipt. Valid values for this field range from 0 to 9, where 0 is the default. As all printer types are supported, a specific setting is required as left margin printing differs depending on the printer model. Recommended setting: 3.

Select if a USB connection is required for the POS terminal to HP or Epson printer connections. This checkbox alters the available selections for Port and Port Type.

Enhances performance if shared printing on one printer. The Share Printer option is disabled if the Use OPOS checkbox is selected. If using an OPOS driver when there are no applications sharing the printer, unselect the Shared Printer checkbox to prevent unnecessary delays caused by opening and closing the connection to the printer. This option is selected by default.

This option is selected by default and allows all supported receipt printers to show special characters like the Euro symbol, EXCEPT for the IBM 4610-TF6. When using the IBM 4610-TF6 receipt printer with InfoGenesis POS version 4.4.7 or higher, uncheck this checkbox. (If using IBM 4610 printers that fail after upgrading to 4.4.8 or higher, uncheck the box, power the printers off and on, and run InfoGenesis Setup Manager to clear the option from the terminal’s memory.)

Select this option to use the default font for the designated printer. Deselect this checkbox to have the printer print in a different font. This option turned off by default.

Select this option when a printer has an MSR attached. Do not select this checkbox when the printer does not come with an integrated MSR. Currently this functionality is only for Zebra Cameo and RW220 printers.

Select this option to have receipt data print upside down. By default, this option is not selected. This setting can be used for any type of receipt printer, but currently the Epson TM-L90 is the only printer supported by InfoGenesis POS to print receipts upside down.

When this option is checked, the Port drop-down list contains selections for com1 through com32 to be used for serial receipt printers, Bluetooth printers, or third-party interfaces such as Smart Receipt™ (com20). This option is unchecked by default. The Use 3rd party interface and Use OPOS options are mutually exclusive; if one is selected, the other is disabled.

Customer Display

For POS terminals that contain customer displays, select the appropriate setting from the drop-down menu. Port setting options are as follows:

• none - default setting

• Asian (APA)

• com1

• com3

• com4

• com6

• Dual (com1)

• Dual (com2)

• Dual (com6)

• OPOS

• PAR1

• PAR2

Cash Drawer

Select a setting for the cash drawer. Port setting options are as follows:

• none - default setting

• J2 Dual

• J2 Single

• OPOS

• Print Kick Out

PAR Terminals Only: PAR Single and PAR Dual.

Coin Dispenser

Select a setting for terminals integrated with coin dispensers: Standard Port Settings are as follows:

• none - default setting

• OPOS

• com1

Scale

Select a setting for terminals integrated with scales: Standard Port Settings are as follows:

• none - default setting

• com1

• com6

Scanner

Select a setting for terminals integrated with scanners: Standard Port Settings are as follows:

• none - default setting

• com1

• com2

• com4

• com6

• com7

Com3 only appears when terminal type is selected from any of the following on Terminal form:

• Tablet DT365/DT390

• PAR Ever Serve 500

• Par EverServ 2000

Select the correct speed for the type of scanner being connected. Baud Rate Standard Settings are as follows:

• 1200

• 2400

• 4800

• 9600

• 19200

• 57600

• 115200

In general, set the baud rate for Motorola scanners to 9600 and set the baud rate for the DT365 and DT390 tablets to 57600.

Bar Gun

Select the correct bar gun port. Standard Port Settings are as follows:

• None - default setting

• com1

• com6

Select the correct speed for the type of bar gun being connected. Baud Rate Standard Settings are as follows:

• 1200

• 2400

• 4800

• 9600

The maximum time allowed in milliseconds for the POS terminal to get a response from the bar gun. The default setting is 3000. Timeout Ranges: 250 to 20000 (20 seconds).

Select the appropriate format for the bar gun. When a data format is selected, the recommended Baud Rate for the data format is automatically selected. If a different setting is required, the recommended settings can be changed. Data Format Standard Settings are as follows:

• 1Byte

• Berg Basic (formerly 5Byte)

• Samsung 650

Recommended Format/Baud Rate settings as follows:

• 1 Byte = Baud Rate 2400

• Berg Basic = Baud Rate 9600

• Samsung 650 = 2400

RFID Key Card Interface

Select the provider from the drop-down.

Enter the username provided by AssaAbloy.